A Biomimetic Multifunctional Scaffold for Infectious Vertical Bone Augmentation.

The regenerative treatment of infectious vertical bone defects remains difficult and challenging today. Current clinical treatments are limited in their ability to control bacteria and infection, which is unfavorable for new bone formation and calls for a new type of material with excellent osteogenic and antibacterial properties. Here a multifunctional scaffold is synthesized that mimics natural bone nanostructures by incorporating silver nanowires into a hierarchical, intrafibrillar mineralized collagen matrix (IMC/AgNWs), to achieve the therapeutic goals of inhibiting bacterial activity and promoting infectious alveolar bone augmentation in rats and beagle dogs. An appropriate concentration of 0.5 mg mL-1 AgNWs is selected to balance biocompatibility and antibacterial properties. The achieved IMC/AgNWs exhibit a broad spectrum of antimicrobial properties against Gram-negative Porphyromonas gingivalis and Gram-positive Streptococcus mutans. When the IMC/AgNWs are cocultured with periodontal ligament stem cells, it possesses excellent osteoinductive activities under both non-inflammatory and inflammatory conditions. By constructing a rat mandibular infected periodontal defect model, the IMC/AgNWs achieve a near-complete healing through the canonical BMP/Smad signaling. Moreover, the IMC/AgNWs enhance vertical bone height and osseointegration in peri-implantitis in beagle dogs, indicating the clinical translational potential of IMC/AgNWs for infectious vertical bone augmentation.

Auxiliary occlusal devices for IO scanning in a complete digital workflow of implant-supported crowns: a randomized controlled trial.

OBJECTIVES: To compare the crown accuracy and time efficiency of a complete digital workflow, utilizing an auxiliary occlusal device and IO scanning, with a conventional workflow, for multiple implant-supported single crowns. MATERIALS AND METHODS: 24 patients with two adjacent posterior implants were included. 12 patients were randomly assigned to digital workflow group, involving intra-oral scanning with an auxiliary occlusal device and manufacture of customized abutments and zirconia single crowns (test group). The other 12 were assigned to the conventional workflow (control group), involving conventional impression and CAD-CAM crowns based on stone casts. Crown scanning was done before and after clinical adjustment using an intraoral scanner. Two 3D digital models were overlapped to assess dimension changes. Chair-side and laboratory times for the entire workflow were recorded and a linear mixed model and Independent-sample t tests were used for the statistical analysis. RESULTS: The maximum occlusal deviation was 279.67 ± 112.17 µm and 479.59 ± 203.63 µm in the test and control group, respectively (p < 0.001). The sizes of the occlusion adjustment areas were 12.12 ± 10.51 mm2 and 25.12 ± 14.14 mm2 in the test and control groups, respectively (p = 0.013). The mean laboratory time was 46.08 ± 5.45 and 105.92 ± 6.10 min in the test and control groups, respectively (p < 0.001).The proximal contact adjustment and mean chair-side time showed no statistically significant difference between two groups. CONCLUSIONS: A digital workflow for two implants-supported single crowns using an auxiliary device required fewer occlusal crown adjustments, and less laboratory time compared to conventional workflow. CLINICAL RELEVANCE: The use of auxiliary occlusal devices in IOS enhances the accuracy of virtual maxillomandibular relationship in extended edentulous spans. Consequently, employing a digital workflow for multiple implants-supported crowns using IO scanning and an auxiliary occlusal device proves to be a feasible, accurate and efficient approach.

Crown adjustment and chairside efficiency of single-unit restorations fabricated from immediate and staged impressions using a digital workflow for posterior implants.

PURPOSE: This is a clinical study to compare immediate and staged impression methods in a complete digital workflow for single-unit implants in the posterior area. MATERIALS AND METHODS: Sixty patients requiring single-unit implant crowns were enrolled. Forty patients were assigned to the test group, immediate digital impression after implant surgery with crown delivery 4 months later. The remaining 20 patients were assigned to the control group, staged digital impressions 4 months after implant surgery, and crown delivery 1 month later. Both workflows involved free-model CAD-CAM crown fabrications. The crowns were scanned before and after clinical adjustment using an intraoral scanner (TRIOS Color; 3Shape). Two 3D digital models were trimmed and superimposed to evaluate the dimensional changes using Geomagic Control software. Chairside times for the entire workflow were recorded. Kruskal-Wallis was performed to compare crown adjustments between two groups, while One-way ANOVA was used to compare chairside time durations between the test and control groups. RESULTS: All crowns were delivered without refabrication. The average maximum occlusion adjustment of crowns was -353.2 ± 207.1 µm in the test group and -212.7 ± 150.5 µm in the control group (p = 0.02). The average area of occlusal adjustment, measured as an area of deviation larger than 100 µm, was 14.8 ± 15.3 and 8.4 ± 8.1 mm2 in the test and control groups, respectively (p = 0.056). There were no significant differences in the mesial and distal contact adjustment amounts, or the maximum deviations of the proximal area, between the two groups. The mean chair-side time was 50.25 ± 13.48 and 51.20 ± 5.34 min in the test and control groups, respectively (p = 0.763). CONCLUSIONS: The immediate impression method in the digital workflow for single-unit implants required more occlusal adjustments of crowns but showed similar chairside times compared to the staged impression method.

Digital registration versus cone-beam computed tomography for evaluating implant position: a prospective cohort study.

BACKGROUND: Postoperative cone-beam computed tomography (CBCT) examination is considered a reliable method for clinicians to assess the positions of implants. Nevertheless, CBCT has drawbacks involving radiation exposure and high costs. Moreover, the image quality can be affected by artifacts. Recently, some literature has mentioned a digital registration method (DRM) as an alternative to CBCT for evaluating implant positions. The aim of this clinical study was to verify the accuracy of the DRM compared to CBCT scans in postoperative implant positioning. MATERIALS AND METHODS: A total of 36 patients who received anterior maxillary implants were included in this clinical study, involving a total of 48 implants. The study included 24 patients in the single implant group and 12 patients in the dual implant group. The postoperative three-dimensional (3D) positions of implants were obtained using both CBCT and DRM. The DRM included three main steps. Firstly, the postoperative 3D data of the dentition and intraoral scan body (ISB) was obtained through the intraoral scan (IOS). Secondly, a virtual model named registration unit which comprised an implant replica and a matching ISB was created with the help of a lab scanner and reverse engineering software. Thirdly, by superimposing the registration unit and IOS data, the postoperative position of the implant was determined. The accuracy of DRM was evaluated by calculating the Root Mean Square (RMS) values after superimposing the implant positions obtained from DRM with those from postoperative CBCT. The accuracy of DRM was compared between the single implant group and the dual implant group using independent sample t-tests. The superimposition deviations of CBCT and IOS were also evaluated. RESULTS: The overall mean RMS was 0.29 ± 0.05 mm. The mean RMS was 0.30 ± 0.03 mm in the single implant group and 0.29 ± 0.06 mm in the dual implant group, with no significant difference (p = 0.27). The overall registration accuracy of the IOS and CBCT data ranged from 0.14 ± 0.05 mm to 0.21 ± 0.08 mm. CONCLUSION: In comparison with the 3D implant positions obtained by CBCT, the implant positions located by the DRM showed clinically acceptable deviation ranges. This method can be used in single and dual implant treatments to assess the implant positions.

Screw-retained ceramic-veneered/monolithic zirconia partial implant-supported fixed dental prostheses: A 5 to 10-year retrospective study on survival and complications.

PURPOSE: To assess the clinical performance of screw-retained, ceramic-veneered, monolithic zirconia partial implant-supported fixed dental prostheses (ISFDP) over 5-10 years and to evaluate implant- and prosthesis-related factors influencing treatment failure and complications. MATERIALS AND METHODS: Partially edentulous patients treated with screw-retained all-ceramic ISFDPs with 2-4 prosthetic units with a documented follow-up of ≥5 years after implant loading were included in this retrospective study. The outcomes analyzed included implant/prosthesis failure and biological/technical complications. Possible risk factors were identified using the mixed effects Cox regression analysis. RESULTS: A screened sample of 171 participants with 208 prostheses (95% of the restorations were splinted crowns without a pontic) supported by 451 dental implants were enrolled in this study. The mean follow-up duration after prosthesis delivery was 82.4 ±17.2 months. By the end of the follow-up period, 431 (95.57%) of the 451 implants remained functional at the implant level. At the prosthesis level, 185 (88.94%) of the 208 partial ISFDPs remained functional. Biological complications were observed in 67 implants (14.86%), and technical complications were observed in 62 ISFDPs (29.81%). Analysis revealed only emergence profiles (over-contoured) as a significant risk factor for implant failure (P<0.001) and biological complications (P<0.001). Full-coverage ceramic-veneered zirconia prostheses had a significantly greater chance of chipping (P<0.001) compared with buccal-ceramic-veneered or monolithic zirconia prostheses. CONCLUSIONS: Screw-retained ceramic-veneered, monolithic partial ISFDPs have a favorable long-term survival rate. Over-contoured emergence profile is a significant risk factor associated with implant failure and biological complications. Buccal-ceramic-veneered and monolithic zirconia partial ISFDPs lower the initial prevalence of chipping compared with a full-coverage veneered design.

The facial-coronal ridge crest alterations after single immediate implant placement and provisionalization with thin buccal plate phenotype in anterior maxilla: A radiographic case-series study.

AIM: To explore the features of and potential landmarks that predict crestal ridge remodeling after immediate implant placement and provisionalization (IIPP) with thin buccal plate phenotype in the anterior maxilla. MATERIALS AND METHODS: Patients requiring IIPP of single maxillary incisor with thin buccal bone plate (<1 mm) were recruited. Cone-beam computed tomography (CBCT), performed before and 6 months after the intervention, were three-dimensionally superimposed. A virtual line connecting the bony emergence points of adjacent teeth was drawn as a reference. The facial-coronal alveolar crest of the extraction socket and healed ridge were located in mesial, middle and distal cross-sectional planes, and linear ridge reductions were measured. The correlation between ridge reduction and local factors was analyzed. RESULTS: Fifty patients were included. From the extraction socket to healed ridge, the alveolar crest underwent linear bone reduction of 1.50 ± 0.50, 1.54 ± 0.66 and 1.65 ± 0.73 mm in the mesial, middle, and distal regions in an apical-palatal direction. The middle region had significantly higher horizontal (facial-palatal) but lower vertical (coronal-apical) bone reduction than the mesial and distal areas (P < 0.01). The facial-coronal ridge crest of the healed ridge located close to the reference line. Ridge reduction positively correlated with the distance between the initial facial-coronal crest of the extraction socket and the reference line (P < 0.01). CONCLUSIONS: Alveolar crest of the socket lost its curvature and tended to attain a flat profile after IIPP due to inconsistent ridge reduction in middle, mesial and distal areas. The reference line may be a potential landmark for predicting the ridge crest after remodeling.

Quantitative analysis of the color in six CAD-CAM dental materials of varied thickness and surface roughness: An in vitro study.

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) monochromatic restorative materials are gaining popularity because of their convenience and efficiency. However, studies that quantitatively analyzed color change associated with thickness and surface roughness are sparse. PURPOSE: The purpose of this in vitro study was to quantitatively evaluate the color of 6 CAD-CAM monochromatic materials of different thickness and surface roughness using the CIELab color system. MATERIAL AND METHODS: A total of 150 12×12-mm square specimens of 6 different CAD-CAM monochromatic materials (VITA Enamic HT [VE], IPS e.max CAD HT [LS], LAVA Ultimate HT [LU], Telio CAD HT [TE], VITA Suprinity HT [VS], and Celtra Duo HT [CD]) in shade A2 and 5 different thicknesses (from 0.5 mm to 2.5 mm, with 0.5-mm increments) were fabricated (n=5). After 3 different surface treatments (polished, roughened by SiC P800-grit, and P300-grit), CIELab color parameters (L*, a* and b*) were measured using a spectrophotometer (VITA Easyshade V), and surface roughness was measured with a profilometer (VK-X200). Color variation was quantified by ΔE00 and 50:50% acceptability and perceptibly thresholds. Data analyses were performed using MANOVA, 2-way ANOVA, post hoc Tukey-Kramer test, and the 1-sample t test (α=.05). RESULTS: The L*, a*, and b* of the monochromatic specimens were significantly influenced by material type, thickness, and surface roughness (P<.001). An overall increase in the L* (from 61.90 to 82.2), a* (from -4.22 to 1.16), and b* (from 5.48 to 43.22) of the specimens was observed with increased thickness. The roughened specimens exhibited lower L* and higher a* and b* than the polished ones (P<.001). The use of P300-grit for roughening resulted in greater ΔE00 compared with P800-grit (P<.001). As thickness decreased or surface roughness increased, the ΔE00 increased and exceeded the acceptability and perceptibly thresholds for color difference. CONCLUSIONS: Material type, thickness, and surface roughness were major factors affecting the color of CAD-CAM monochromatic materials. Variations in thickness of 0.5 mm or more, as well as roughening treatments, may lead to clinically unacceptable color changes.

Integrative metabolomic and transcriptomic reveals potential mechanism for promotion of ginsenoside synthesis in Panax ginseng leaves under different light intensities.

Panax ginseng C.A. Meyer is a shade plant, and its leaves are an important medicinal part of P. ginseng. Light intensity plays a crucial role in physiological activities and metabolite accumulation in P. ginseng. Currently, little is known about the molecular mechanisms underlying physiological changes and quality under different light intensities in P. ginseng leaves. Therefore, we investigated the changes in photosynthetic physiology, secondary metabolism, transcriptomics, and metabolomics of P. ginseng leaves under different light intensities [T20 (20 µmol m-2·s-1), T50 (50 µmol m-2·s-1), T100 (100 µmol m-2·s-1)]]. Higher light intensity positively influenced the yield, photosynthesis, and accumulation of polysaccharides, soluble sugars, terpenoids, and ginsenosides in P. ginseng leaves. The T100 treatment notably promoted the accumulation of ginsenosides in the leaves, resulting in a 68.32% and 45.55% increase in total ginsenosides compared to the T20 and T50 treatments, respectively. Ginsenosides Rg1, Re, Rb1, Rc, Rg2, Rb2, Rb3, and Rd were 1.28-, 1.47-, 2.32-, 1.64-, 1.28-, 2.59-, 1.66-, and 2.28-times higher than in the T20 treatment. Furthermore, 285 differentially accumulated metabolites (DAMs) and 4218 differentially expressed genes (DEGs) in the metabolome and transcriptome of P. ginseng leaves, respectively, were identified. 13 triterpenoid saponins were significantly upregulated, and three were downregulated. The expression of genes encoding photosystem II reaction center proteins was upregulated under the T100 treatment, thereby increasing photosynthetic activity. The T100 treatment enhanced the expression of genes involved in photosynthetic carbon and energy metabolism in P. ginseng. The expression of antenna protein synthesis genes was upregulated under the T20, which increased the ability to capture light in P. ginseng leaves. T100 upregulated the expression of HMGR, SS, CYP716A53v2, UGT74AE, PgUGT1, and UGTPg45, thereby promoting terpene and ginsenoside synthesis. In summary, 100 µmol m-2·s-1 was conducive to quality formation of P. ginseng leaves. This study elucidates molecular mechanisms underlying the photosynthetic physiology and ginsenoside synthesis in P. ginseng under varying light intensities and provides a theoretical basis for the P. ginseng cultivation and its industrial production of secondary metabolites.

Lateral sinus floor elevation in patients with sinus floor defects: A retrospective study with a 1- to 9-year follow-up.

OBJECTIVES: We aimed to retrospectively evaluate the long-term clinical outcomes of lateral sinus floor elevation (LSFE) in patients with sinus floor defects. MATERIALS AND METHODS: Between 2008 and 2020, patients with sinus floor defects were recruited after confirmation on preoperative cone-beam computed tomography (CBCT). The split-thickness flap technique with a palatal crestal incision was used to manage tissue adhesion in the bone defects area. A resorbable collagen membrane was used to close the sinus floor defects from the crestal side before bone substitute placement. Of 58 implants, 47 (81.0%) were placed after an 8-month healing period, whereas 11 were placed simultaneously. Patients were followed up by radiography and clinical examination for 1-9 years. Finally, the cumulative survival rate (CSR) of implants, surgical complications, and marginal bone loss (MBL) were recorded and analyzed. RESULTS: In total, LSFE was performed in 36 sinuses (35 patients) with sinus floor defects, of which surgery was completed in 35 sinuses (97.2%) in the first attempt. Schneiderian membrane perforations (SMP) occurred in 10/36 (27.8%) sinuses; nine were repaired carefully, whereas one surgery was suspended due to complicated SMP, and successful re-entry LSFE was performed 4 months later. After a follow-up period of 1-9 years, the CSR was 96.5% at the 1-year, 3-year, 5-year, and 7-year follow-ups and 64.3% at the 8-year follow-up. CONCLUSION: Within the limitations of this study, sinus floor defects seem not to compromise LSFE therapy after appropriate management and long-term clinical outcomes are predictable.

Clinical evaluation and quantitative occlusal change analysis of posterior implant-supported all-ceramic crowns: A 3-year randomized controlled clinical trial.

OBJECTIVES: To compare the survival and complication rates of posterior screw-retained monolithic lithium disilicate (LS2 )/veneered zirconia (ZrO2 ) single implant crowns (SICs), as well as analyze the occlusal changes observed during a 3-year follow-up period. MATERIALS AND METHODS: Thirty-three patients were included and randomly divided into two groups. The test group consisted of 17 patients who received monolithic-LS2 -SIC, while the control group consisted of 16 patients who received veneered-ZrO2 -SIC. Implant/prosthesis survival rates, technical complications, peri-implant soft tissue conditions, and quantitative occlusal changes of SIC (obtained by the intra-oral scanner and analyzed in reverse software Geomagic Control 2015) were assessed at 1- and 3-year follow-ups. Bone loss and Functional Implant Prosthodontic Score (FIPS) were evaluated at a 3-year follow-up. RESULTS: After a 3-year follow-up period, one patient dropped out of the follow-up. No implant loss was observed. One crown was fractured, resulting in prosthesis survival rates of 93.75% for the monolithic group and 100% for the veneered group. A technical complication rate of 25% (4/16) was observed in the veneered group (p = .333). No significant differences in the marginal bone loss were observed at the 3-year follow-up (0.00 (-0.22, 0.17) mm versus 0.00 (-0.12, 0.12) mm, p = .956). The total FIPS scores for the test group were 9.0 (9.0, 9.0), while the control group received scores of 9.0 (8.0, 10.0) (p = .953). The changes in mean occlusal clearance were 0.022 ± 0.083 mm for the test and 0.034 ± 0.077 mm for the control group (at 3 years, p = .497). The changes in occlusal contact area were 1.075 ± 2.575 mm2 for the test and 1.676 ± 2.551 mm2 for the control group (at 3 years, p = .873). CONCLUSION: After a 3-year follow-up, screw-retained monolithic LS2 and veneered ZrO2 SIC demonstrated similar survival rates. The occlusal performance of implant prostheses needs to be closely examined during follow-up, and appropriate occlusal adjustments need to be considered.

Effects of thickness and polishing treatment on the translucency and opalescence of six dental CAD-CAM monolithic restorative materials: an in vitro study.

BACKGROUND: Computer-aided design and computer-aided manufacturing (CAD-CAM) materials for prosthetic is gaining popularity in dentistry. However, limited information exists regarding the impact of thickness and roughening treatment on the optical properties of contemporary CAD-CAM restorative materials. This study aimed to quantitatively evaluate the translucency and opalescence of six dental CAD-CAM materials in response to different thicknesses and roughening treatments. METHODS: Six dental CAD-CAM materials, lithium disilicate glass-ceramic (IPS e.max CAD, LS), polymer-infiltrated ceramic (VITA Enamic, VE), resin-nano ceramic glass-ceramic (LAVA Ultimate, LU), polymethyl methacrylate (Telio CAD, TE), and two zirconia reinforced lithium silicate (VITA Suprinity, VS, and Celtra Duo, CD), in shade A2 were prepared as 12 × 12mm2 specimens of four thicknesses (0.5mm, 1.0mm, 1.5mm, and 2.0mm) (N = 240, n = 10). After three different treatments (polished, roughened by SiC P800-grit, and SiC P300-grit), the translucency parameter (TP00) and opalescence parameter (OP) were measured with a spectrophotometer (VITA Easyshade V). The surface roughness was analyzed with a shape measurement laser microscope. The data were analyzed using a MANOVA, post hoc Tukey-Kramer test, the t test, and regression analysis (α = .05). RESULTS: The TP00 and OP were significantly influenced by material type, thickness and roughening treatment (P < .05). TP00 showed a continues decline with increasing thicknesses, while the variations of OP were material-dependent. TP00 ranged from 37.80 (LS in 0.5mm) to 5.66 (VS in 2.0mm), and OP ranged from 5.66 (LU in 0.5mm) to 9.55 (VS in 0.5mm). The variations in TP00 of all materials between adjacent thicknesses ranged from 2.10 to 15.29, exceeding the acceptable translucency threshold except for LU. Quadratic and logarithmic regression curves exhibited the best fit for TP00 among the materials. Compared to polished specimens, rougher specimens exhibited lower TP00 and higher OP in all materials except for LS (P < 0.05). Roughening with P300-grit decreased TP00 and OP by an average of 2.59 and 0.43 for 0.5mm specimens, and 1.26 and 0.25 for 2.0mm specimens, respectively. CONCLUSIONS: Variations in translucency caused by thickness and roughening treatment were perceptible and may be clinically unacceptable. Careful consideration should be given to the selection of CAD-CAM materials based on their distinct optical properties.

Several potential serum proteomic biomarkers for diagnosis of osteoarticular tuberculosis based on mass spectrometry.

BACKGROUND: Osteoarticular tuberculosis is one of the extrapulmonary tuberculosis (EPTB) diseases, which is mainly caused by infection of Mycobacterium tuberculosis (MTB) in bone and joints. The limitation of current clinical test methods is leading to a high misdiagnosis rate and affecting the treatment and prognosis. This study aims to search serum biomarkers that can assist in the diagnosis of osteoarticular tuberculosis. METHODS: Proteomics can serve as an important method in the discovery of disease biomarkers. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to analyze proteins in 90 serum samples, which were collected from June 2020 to December 2021, then evaluated by statistical analysis to screen potential biomarkers. After that, potential biomarkers were validated by enzyme-linked immunosorbent assay (ELISA) and diagnostic models were also established for observation of multi-index diagnostic efficacy. RESULTS: 118 differential expressed proteins (DEPs) were obtained in serum after statistical analysis. After the diagnostic efficacy evaluation and clinical verification, inter-alpha-trypsin inhibitor heavy chain H2 (ITIH2), complement factor H-related protein 2 (CFHR2), complement factor H-related protein 3 (CFHR3), and complement factor H-related protein 5 (CFHR5) were found as potential biomarkers, with 0.7167 (95 %CI: 0.5846-0.8487), 0.8600 (95 %CI: 0.7701-0.9499), 0.8150 (95 %CI: 0.6998-0.9302), and 0.9978 (95 %CI: 0.9918-1.0040) AUC value, respectively. The remaining DEPs except CFHR5 were constructed as diagnostic models, the diagnostic model contained CFHR2 and CFHR3 had good diagnostic efficacy with 0.942 (95 %CI: 0.872-0.980) AUC value compared to other models. CONCLUSION: This study provides a reference for the discovery of serum protein markers for osteoarticular tuberculosis diagnosis, and the screened DEPs can also provide directions for subsequent pathogenesis research.

Plaque accumulation on the fitting surface of full-arch implant-supported fixed prostheses with contact or noncontact pontics: A split mouth randomized controlled trial.

OBJECTIVE: To explore the differences in plaque accumulation on the fitting surface of full-arch implant-supported fixed prostheses with contact or noncontact pontics. MATERIALS AND METHODS: Nineteen patients (20 prostheses, 7 in the maxilla, and 13 in the mandible) intending to undergo full-arch implant-supported immediate function prostheses were recruited. During immediate restoration and using the midline as the boundary, one side was restored as a pontic and mucosa noncontact type (the test group), and the opposite side was restored as a pontic and mucosa contact type (the control group). In a follow-up 6 months after the surgery, the cleanliness of the fitting surface of the immediate prosthesis was evaluated by plaque staining and debris index determination. Patient satisfaction was investigated by questionnaire. RESULTS: Twenty prostheses from 19 patients included in the randomized controlled trial were followed up. Among the 20 prostheses, the percentage of area covered with plaque was significantly lower in the test group compared with that in the control group (31.5 ± 15.8% vs. 43.7 ± 15.3%; p < 0.001). The debris index in the test group was lower than that in the control group, although the difference was not statistically significant (2.77 ± 0.73 vs. 3.15 ± 0.90; p > 0.05). In the patient satisfaction survey, most of the patients were satisfied with most aspects of the prostheses, however, nearly half of the patients were not satisfied with the cleaning. CONCLUSIONS: The pontic and mucosa noncontact prosthetic design reduces plaque accumulation on the fitting surface, which is beneficial for maintaining oral cleanliness. However, the majority of study samples were mandible and conclusions may not be fully applicable to maxilla. TRIAL REGISTRATION: www.chictr.org.cn (ChiCTR1900028576). CLINICAL SIGNIFICANCE: The noncontact design in full-arch implant-supported fixed prostheses may be an effective measure of improving oral hygiene promotion. There is need for more research that can further improve oral hygiene of patients with full-arch implant-supported prostheses.

A Novel Method to Achieve Preferable Bone-to-Implant Contact Area of Zygomatic Implants in Rehabilitation of Severely Atrophied Maxilla.

Purpose: To propose and evaluate a novel method for achieving a favorable bone-to-implant contact (BIC) area for zygomatic implants (ZIs). Materials and Methods: Patients who needed ZIs to restore a severely atrophied maxilla were recruited. In preoperative virtual planning, an algorithm was utilized to find the ZI trajectory that would achieve the largest BIC area with a predefined entry point on the alveolar ridge. The surgery was conducted according to the preoperative plan with the assistance of real-time navigation. Area BIC (A-BIC), linear BIC (L-BIC), distance from implant to infraorbital margin (DIO), distance from implant to infratemporal fossa (DIT), implant exit section, and deviation of the real-time navigated surgery were measured and compared between the preoperative plan and the placed ZIs. The patients were followed up for 6 months. Results: Overall, 11 patients with 21 ZIs were included. The A-BICs and L-BICs were significantly higher in the preoperative plan than in the placed implants (P < .05). Meanwhile, there were no significant differences in DIO or DIT. The planned-placed deviation was 2.31 ± 1.26 mm for the entry, 3.41 ± 1.77 mm for the exit, and 3.06 ± 1.68 degrees for the angle. All ZIs survived to the 6-month follow-up. Conclusion: This novel method can virtually calculate the trajectory of ZIs and transfer the preoperative plan to surgery to acquire a favorable BIC area. The actual positions of placed ZIs were slightly deviated from the ideal due to navigation errors.

Combining Metabolomics and Transcriptomics to Reveal the Regulatory Mechanism of Taproot Enlargement in Panax ginseng.

Ginseng is regarded as the "king of herbs" in China, with its roots and rhizomes used as medicine, and it has a high medicinal value. In order to meet the market demand, the artificial cultivation of ginseng emerged, but different growth environments significantly affect the root morphology of garden ginseng. In this study, we used ginseng cultivated in deforested land (CF-CG) and ginseng cultivated in farmland (F-CG) as experimental materials. These two phenotypes were explored at the transcriptomic and metabolomic levels so as to understand the regulatory mechanism of taproot enlargement in garden ginseng. The results show that, compared with those of F-CG, the thickness of the main roots in CF-CG was increased by 70.5%, and the fresh weight of the taproots was increased by 305.4%. Sucrose, fructose and ginsenoside were significantly accumulated in CF-CG. During the enlargement of the taproots of CF-CG, genes related to starch and sucrose metabolism were significantly up-regulated, while genes related to lignin biosynthesis were significantly down-regulated. Auxin, gibberellin and abscisic acid synergistically regulated the enlargement of the taproots of the garden ginseng. In addition, as a sugar signaling molecule, T6P might act on the auxin synthesis gene ALDH2 to promote the synthesis of auxin and, thus, participate in the growth and development of garden ginseng roots. In summary, our study is conducive to clarifying the molecular regulation mechanism of taproot enlargement in garden ginseng, and it provides new insights for the further exploration of the morphogenesis of ginseng roots.

Use of thrombomodulin-modified thrombin generation in uncomplicated pregnancy: the normal range and prothrombotic phenotype.

Pregnancy is a hypercoagulable state associated with an increased risk of venous thrombosis. Thrombomodulin(TM)-modified thrombin generation is a promising laboratory method to detect the thrombotic tendency and prothrombotic phenotype. 141 women were enrolled: 30 healthy non-pregnant controls, 85 healthy pregnant women (26 in 1st trimester, 28 in 2nd trimester, 31 in 3rd trimester), and 26 patients with gestational diabetes mellitus (GDM). Thrombin generation was measured using platelet poor plasma (PPP) TM + and PPP TM- reagents. The parameters were endogenous thrombin potential (ETP), Lagtime, Peak Height, time to peak and ETP ratio(ETP(TM+)/ETP(TM-)). Protein S-depleted plasma samples with different activity were prepared and measured. Pregnancy was associated with a significant decrease of ETP in the presence of TM, compared with that found in the absence of TM. This was observed in all trimesters (1st trimester 1185.67 ± 284.95 nM*min vs.1510.39 ± 281.90 nM*min, p < .001; 2nd trimester 1458.96 ± 349.65 nM*min vs. 1929.10 ± 316.98 nM*min, p < .001; 3rd trimester 1391.60 ± 317.05 nM*min vs. 1854.88 ± 327.60 nM*min, p < .001). The ETP ratio was also markedly increased in all trimesters (0.78 ± 0.10, 0.76 ± 0.11 and 0.74 ± 0.12) compared with that of non-pregnant controls (0.51 ± 0.17, p < .001). The results of ETP ratio in protein S-depleted plasmas were 0.986, 0.943 and 0.880 with 0%, 16% and 40% of protein S activity, which indirect represented the thrombotic phenotype of PS deficiency in pregnancy. TM-modified thrombin generation serves as a useful test for hypercoagulation in pregnant women. The ETP ratio and the reference range of ETP in the presence of TM could provide the basis to predict the risk of thrombotic complications during pregnancy.

Comparison of 4- or 6-implant supported immediate full-arch fixed prostheses: A retrospective cohort study of 217 patients followed up for 3-13 years.

PURPOSE: Choosing four or six implants to support immediate full-arch fixed prostheses (FAFPs) is still controversial worldwide. This study aims to analyze and compare the long-term results of All-on-4 and All-on-6. MATERIALS AND METHODS: This retrospective cohort study enrolled 217 patients rehabilitated with 1222 implants supporting 271 FAFPs, including 202 prostheses supported by 4 implants (All-on-4 group) and 69 prostheses supported by 6 implants (All-on-6 group), and followed up for 3-13 years. Implant survival, prosthesis survival, complications, and implant marginal bone loss (MBL) were evaluated and compared between two groups. Patient characteristics including age, gender, jaw, opposite dentition condition, smoking habit, bruxism, bone quantity and quality, cantilever length (CL), prosthesis material, and oral hygiene were analyzed to assess their influence on the clinical results of the two groups. Six surgeons and three prosthodontists who performed FAFPs more than 5 years were invited for questionnaires, to assess patient- and clinician-related influences on implant number. RESULT: In general, All-on-4 group indicated no significant difference with All-on-6 group in the implant survival (implant-level: hazard ratio [HR] = 1.0 [95% confidence interval (CI): 0.8-1.2], P = 0.96; prosthesis-level: HR = 0.8 [95% CI: 0.3-1.8], P = 0.54), prosthesis survival (odds ratio [OR] = 0.8 [95% CI: 0.3-2.8], P = 0.56), biological complications (OR = 0.9 [95% CI: 0.5-1.8], P = 0.78), technical complications of provisional prosthesis (OR = 1.3 [95% CI: 0.7-2.3], P = 0.42), technical complications of definitive prosthesis (OR = 1.1 [95% CI: 0.6-2.2], P = 0.33) and the 1st, 5th, and 10th year MBL (P = 0.65, P = 0.28, P = 0.14). However, for specific covariates, including elderly patients, opposing natural/fixed dentition, smoking, bruxism, long CL, low bone density, and all acrylic provisional prostheses, All-on-6 was more predictable in some clinical measurements than All-on-4. The implant prosthodontists and the medium-experienced clinicians showed significant preference for All-on-6 (P < 0.05). CONCLUSION: Based on this study, the long-term clinical results showed no significant difference between All-on-4 and All-on-6 groups in general. However, for some specific characteristics, All-on-6 seemed to be more predictable in some clinical measurements than All-on-4. For the clinicians' decision-making, medium-experienced clinicians and the implant prosthodontists showed significant preference for All-on-6.

Primary squamous cell carcinoma of the liver: A case report.

BACKGROUND: Squamous cell carcinoma (SCC) of the liver is rare, and is more commonly found in the skin, rectum, cervical or inguinal lymph nodes. CASE SUMMARY: A 73-year-old man had been experiencing right upper quadrant discomfort for some weeks. He had a 50-year history of smoking and drinking. On average, he smoked 20 cigarettes and consumed 200 galcoholdaily. He didn't have a history of hepatitis or surgery. Fever, vomiting, jaundice, dysuria, chills, and abdominal distention were not observed at the time of admission. Tenderness in the right upper quadrant was found on physical examination, but there was no palpable abdominal mass. No obvious abnormalities in laboratory tests and tumor markers were found. The plasma retention rate of indocyanine green (ICG) at 15 min was 1.35%. Subsequent abdominal ultrasonography showed a mixed echoic mass approximately 3.8 cm diameter in the left caudate lobe of the liver. Abdominal computed tomography confirmed a 3.0 cm × 3.5 cm irregular mass with inhomogeneous density and moderate delayed enhancement in the left caudate lobe of the liver. Laparoscopic left caudate lobectomy was performed to remove the liver mass. Intra-operative findings confirmed a non-cirrhotic liver, with a 3 cm × 3.5 cm white tumor mass in the left caudate lobe with no tumor rupture and no hemoperitoneum. The resection margin was 1.0 cm in width. CONCLUSION: We describe the first case of SCC in the left caudate lobe of the liver, which was successfully treated by surgical resection and postoperative immunotherapy. No tumor recurrence was observed during the 8-mo follow-up.